.jpg) |
 |
Cryo Repair Pricing
Cryo Repair #1......$90.00
Cylinder evaluation, vacuum, NER test, visual
inspection, inner/outer pressure check.
Cryo Repair #2.....$135.00
Re-vacuum of cylinder to below 5 micron,
heated to 250 degrees F., regenerate
molecular sieve, new palladium oxide.
Cryo Repair #3......$80.00
Repair pluming and Regulator, complete
rebuild calibration.
* New parts priced seperatley, only when
neccesary.
|
Cryo Repair #4........$50.00
Clean and polish cylinder.
Cryo Repair #5........$50.00HR
Weld repair, dent removal, footring repair.
|
Vessel Repair Procedures:
*Perform Visual inspection of
outer tank and components.
*Remove float gauge assembly
and inspect for damage.
*Break vacuum with rough pump
or back fill with GN2, replace POV.
*Check for leaks using a Helium
Mass Spectrometer.
*Bake vessel at range of 250-350
degrees F. to reactivate
molecular sieve.
Back to top |
*Under heat, re-evaluate annular space to 10 microns or less.
*Repair or replace all defective plumbing.
*Bench set pressure building and economomizing regulators.
*Pop-test relief valves.
*Perform gas pressure and liquid test to check for
leaks, making sure the tank, regulator, and vavles work to
industrial gas standards, as well as manufacturers standards.
|
.jpg) |
.jpg) |
 |
|
